Tác giả :

1.       Pham Huy TuanNguyen Xuan Quang, Nguyen Ngoc PhuongDesign and Fabrication of a High-Intensity Ultrasonic Transducer for Food Dehydration (in Vietnamese). J. Science & Technology: Technical Universities, Vol. 110, 2016 (Accepted).

2.       Lê Chí Cương and Đặng Thiện NgônStudy on the Influence between Cutting Speed and Surface Layer Residual Stress of Cold-Forging Mold after CNC Wire Cutting Machining Using X-Ray Diffraction, Journal of Science and Technology, 2015 (Accepted).

3.       L.A. TuyenaeE. SzilágyibE. KótaibK. LázárcL. BottyánbT.Q. DungaL.C. CuongdD.D. KhiemaP.T. PhucaL.L. Nguyena,P.T. HueaN.T.N. HueaC.V. TaoeH.D. ChuongeStructural Effects Induced by 2.5MeV Proton Beam on Zeolite4A: Positron Annihilation and X-Ray Diffraction Study, Radiation Physics and Chemistry, Elsevier, Vol.106, Jan. 2015, pp.335-339 (SCI Journal). ISSN: 0969-806X, IF 1.3.

4.       Nguyễn Trường Thịnh, Nguyễn Ngọc Phương, Nguyễn Trọng Tuấn. Planning walking trajectory for a biped robot. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 2, pp. 3-12.

5.       Nguyễn Trọng Tuấn, Nguyễn Trường ThịnhDesign of robotic lawn mower. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 2, pp. 13-22.

6.       Đặng Thiện Ngôn, Phan Van Toan. Research and proposal on welding technique for longitudinal crack defect welding. International Journal of Mechanical Engineering and Applications, Science Publishing Group, ISSN 2330-0248, Vol. 3, No 1-3, 2/2015: Pp. 29-34.

7.       Đặng Thiện Ngôn, Huy-Bich Nguyen. A Study on Durian Processing Technology and Defleshing Machine. Asia Pacific Journal of Sustainable Agriculture Food and Energy (APJSAFE), ISSN 2338-1345, Vol. 3, No 1 (4/2015): Pp. 12-16.

8.       Đặng Thiện Ngôn, Ngô Ngọc Tuyền, Nguyễn Văn Trung. The research on applying-ability of aerostatic bearings for centrifugal machine. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 1, pp. 44-52

9.       Đặng Thiện Ngôn, Tôn Thất Tín, Dương Văn Ba. Effect of nozzle structure on the peeling ability of garlic peeled by pneumatic. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 1, pp. 53-60.

10.  Đặng Thiện Ngôn, Huỳnh Tấn Đạt. Simulation to determine the structure of windcube for small horizontal-axis wind turbine. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 1, pp. 594-601.

11.  Phạm Sơn MinhĐỗ Thành Trung. Verification of External Gas-Assisted Mold Temperature Control for Injection Molding Process. Applied Mechanics and Materials, Volumes 752-753, pp 949-954, ISSN 1662-7482, 4/2015.

12.  Phạm Sơn MinhĐỗ Thành TrungTrần Minh Thế Uyên, Phạm Thanh Bình. Application of cae to design the waste heat recovery from the internal combustion engines. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 1, pp. 594-601.

13.  Phạm Sơn MinhĐỗ Thành TrungTrần Minh Thế Uyên, Phan Thế Nhân. Effect of part thickness and mold temperature on the warpge of polypropylene plate. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 2, pp. 536-543.

14.  Nguyễn Vũ Lân, Hsiao Ming Chien. Improvement of microwave effect on Biodiesel transesterification process by using activated carbon. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 1, pp. 666-673.

15.  Lê Linh, Trương Nguyễn Luân Vũ, Lê Hiếu GiangDesign of multi-loop controller for simplified decoupling system. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 2, pp. 23-29.

16.  Dang Minh Phung, Le Hieu Giang, Nguyen Van Lam, Nguyen Truong Hai, Le Tan Cuong. Reseaching design and manufacturing 4-axis CNC milling machine using Mach3 software applied to manufacture aluminium and ferrous metalsProceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 1, pp. 112-120.

17.  Dang Minh Phung, Nguyen Dang Khoa, Truong Nguyen Luan Vu, Le Minh Tuan. Reseaching design development and manufacturing the cocoa pod cutting machine.Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 1, pp. 934-942.

18.  Lê Phan Hưng, Nguyễn Trường Thịnh. Driving kinetic model and combining control method on autonomous car. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 2, pp. 30-38.

19.  Nguyễn Xuân Quang, Nguyễn Hay, Nguyễn Ngọc Phương, Bùi Ngọc Hùng. Study on influence of ultrasound pre-treatment on the drying rate and color of vietnamese grinseng. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 1, pp. 832-837.

20.  Lê Chí Cương, Nguyễn Vĩnh Phối, Nguyen Trong Thanh. Determination of generalized absorption function using X-ray diffraction on ellipsoid surface using ψ measurement method. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 2, pp. 337-344.

21.  Le Chi Cuong1,a, Nguyen Trong Thanh and Luu Anh Tuyen2,b Determination of Thickness of Coating Thin Films Using X-ray Diffraction. Journal of Science and Technology, Vol. 105A, 2015, pp. 51-55.

22.  Minh-Tai Le, Shyh-Chour Huang. Investigation of effective parameters on  mechanical property in nanoindentation of polymer/carbon nanotubes nanocomposite using square representative volume element. International Conference on Innovation, Communication and Engineering 2014, Taylor & Francis Group,  2015 (EI).

23.  Minh-Tai Le, Shyh-Chour Huang. Numerical Simulation of Nanoindentation of Single Wall Carbon Nanotube Reinforced Epoxy Composite. Applied Mechanics and Materials Vols. 764-765 (2015) pp 66-70 (EI).

24.  Hoai-Nhan Nguyen, Jian Zhou and Hee-Jun Kang. A calibration method for enhancing robot accuracy through integration of an extended Kalman filter algorithm and an artificial neural networkNeurocomputing , Vol. 151, Part 3, pp. 996–1005, 2015.

25.  Le Chi Cuong and Nguyen Vinh Phoi. The Absorption Funtion Of Materials Using X-Ray Diffraction Method. International Conference on Multiphysical Interaction and Environment, March 09-10th, 2015.

26.  Le Chi Cuong and Nguyen Trong Anh Tuan. Computation of Phase Stress of Dual Phase Ferrite-Austenite Stainless Steel Using X-Ray Diffraction. International Conference on Multiphysical Interaction and Environment, March 09-10th, 2015.

27.  Le Chi Cuong and Phan Thanh Vu. Phase Stress Determination for Triple-Phase Ceramic WC-TiC-Co Using X-Ray Diffraction-Isotropic Case. International Conference on Multiphysical Interaction and Environment, March 09-10th, 2015.

28.  Quach Van Thiem, Tran  Van Chu. Study on the effect of Anti-oxidant additives on the tensile strength and flexural strength of wood plastic composite. Forestry science and Technology Journal of Viet Nam Forestry University, No 1-2015.

29.  K.T. Hoang and S.H. Yang. Study of energy distribution to electrodes in a micro-EDM process by utilizing the electro-thermal model of single discharges. Journal of Mechanical Science and Technology, Vol. 29, No.1, pp. 349-356, 2015.

30.  K.T. Hoang and S.H. Yang. A new approach for micro-WEDM control based on real-time estimation of material removal rate. International Journal of Precision Engineering and Manufacturing, Vol. 16, No.2, pp. 241-246, 2015.

31.  K.T. Hoang and S.H. Yang. Kerf analysis and control in dry micro-wire electrical discharge machining. International Journal of Advanced Manufacturing Technology, Vol. 78, No.9-12, pp. 1803-1812, 2015.

32.  Nguyễn Trường Thịnh, Tưởng Phước Thọ,  Nguyễn Ngọc PhươngDesign and development reception robot. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 2, pp. 217-224.

33.  Thái Văn Phước, Trần Ngọc ĐảmEffects of cold-plasma at atmospheric pressure on killing of s.aureus on cold tissue. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 1, pp. 654-658.

34.  Thái Văn Phước, Trần Ngọc ĐảmInfluency of cold-plasma at atmospheric on effect of surface pretreatment of plastic PP. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 2, pp. 373-377.

35.  Dang Minh Phung, Le Hieu Giang, Le Linh, Truong Nguyen Luan Vu, Tran Tien Phat. Reseaching design development and manufacturing the gear hobbing CNC machine served in educationProceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 1, pp. 223-232.

36.  Hoang An Quoc, Nguyen Vu Lan, Nguyen Thanh Quang, Nguyen Ngoc Tuyen. A study on factors that affect on the fixed bed gasification process. Proceedings of the 4thNational Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 1, pp. 513-518.

37.  Dương Đăng DanhApply the inverson method to mechanism synthesis. Kỷ yếu Hội nghị Máy và Cơ cấu  toàn quốc NCOMM 2015, ngày 30/10/2015, Tp.HCM.

38.  Nguyễn  Thanh Tân, Nguyễn Thị Hồng Minh, Phạm Huy TuânThe shortest-path algorith in flat pattern generation. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 2, pp. 217-224.

39.  Trần Văn TrọnResearch and develop a electroplating machine to improve the quality of plating layer on machine part’s surface. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 2, pp. 329-336.

40.  Phạm Thị Hồng Nga, Võ Ngọc Yến Phương, Trần Ngọc Thiện, Trần Thế San, Yehua JIANG. MICROSTRUCTURE AND HIGH-TEMPERATURE WEAR BEHAVIORS OF Co/tic LASER COATINGS ON TOOL STEEL. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 2, pp. 378-385.

41.  Lê Phan Hưng, Nguyễn Trường ThịnhMotion prediction of lung tumour based on NLMS algorithm. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 2, pp. 39-48.

42.  Tưởng Phước Thọ Nguyễn Trường Thịnh,  Nguyễn Ngọc PhươngDesign and development 3D robot. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 2,  pp. 188-197.

43.  Minh-Tai Le, Shyh-Chour Huang. Mechanical Characterization of Carbon Nanotube Reinforced Polymer Nanocomposite by Nanoindentation Using FEM”, Sensors and MaterialsSensors and Materials, Vol. 27, No. 8,  9/2015, pp. 617-624, IF: 0.46, doi: 10.18494/SAM.2015.1098 (SCIE).

44.  Minh-Tai Le, Shyh-Chour Huang. Effect of nano-fillers on the strength reinforcement of novel hybrid polymer nanocomposites. Materials and Manufacturing Processes, 5/2015, IF: 1.63, doi: 10.1080/10426914.2015.1048365 (SCIE).

45.  Minh-Tai Le, Shyh-Chour Huang. Fabrication and characterization of SWCNT-reinforced Polyester nanocomposites using Tensile test and Nanoindentation techniques. Advanced Materials Letters, 2015, Vol. 6, No. 8, pp. 711-716, doi: 10.5185/amlett.2015.5821 (ISI).

46.  Van Hưu Thinh, Lo Xuan Khai. Designing and manufacturing a plastering machine. Vietnam Mechanical engineering journal, ISSN0866-7056, Vol 6/2015.

47.  Van Hưu Thinh, Nguyen Thoai Khanh. Design, Mannufacturing of a cocoa pod splitting machine. Vietnam Mechanical engineering journal, ISSN0866-7056, Vol 6/2015.

48.  Van Hưu Thinh, Le Quang Hung. Design and analysis procedure of derrick on jack up rig. Vietnam Mechanical engineering journal, ISSN0866-7056 Vol 11/2015.

49.  Shyh-Chour Huang, Minh-Tai LeOptimal design of process parameters,  experimental fabrication and characterisation of a novel hybrid polymer nanocomposite. International Journal of Materials and Product Technology (Special Issue on: "Synthesis, Characterisation and Applications of Nanocomposite Materials),  9/2015 (SCIE).

50.  Minh-Tai Le, Shyh-Chour Huang. Thermal and mechanical behavior of hybrid polymer nanocomposite reinforced with Graphene nanoplateletsMaterials, 2015, Vol. 8, No. 8, pp. 5526-5536; doi:10.3390/ma8085262 (SCIE).

51.  Minh-Tai Le, Shyh-Chour Huang. Reinforcement of Strength of Epoxy/Polyester blend composite using Graphene Nanoplatelets. Proceeding of International Conference on Applied System Innovation 2015 (ICASI2015).

52.  Đỗ  Văn HiếnA refined Finite Element Method (h-FEM, p-FEM) applied to free Vibration of  Truss Structures. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 2, pp. 884-889.

53.  Phạm Huy Tuân, Nguyễn Hà Ngọc Hiếu, Lê Minh Nhật. Design of a constant force mechanism for robot end effector. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 2, pp. 79-86.

54.  Van Linh Tran, Quang Vinh Bui, Tuan Anh Nguyen, Xuan Hao Nguyen, Cong Bang Pham, Viet Anh Dung CaiStudy, design and control robot palletizer. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 2, pp. 130-139.

55.  Van Hưu Thinh, Nguyen  Tien DungDesigning and manufacturing Carrots machine. Proceedings of national conference on machines and mechanisms 2015 (NCOM 2015), 1st November, 2015.

56.  Văn Hữu Thịnh, Nguyễn Thoại Khanh. Research, design of the cocoa beans separator machine. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 1, pp. 707-713.

57.  Cái Việt Anh Dũng, Nguyễn Minh Triết, Nguyễn Việt Thắng, Nguyễn Ngọc Phương, Nguyễn Trọng Thịnh, Nguyễn Hoàn Dzũ, Nguyễn Văn Bách, Lưu Bảo Ngọc.Robotic tele-operation system using haptic force. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 2, pp. 121-129.

58.  Nguyễn Văn Khiển, Phạm Huy Hoàng, Phạm Huy TuânFlexure mechanism and applications. Proceedings of the 4th National Conference on Mechanical Science &Technology, HCMC November 6th, 2015, vol. 2, pp. 778-786.

59.  Huy-Tuan Pham, Minh-Nhat Le, Van-Khien Nguyen. Design of a Multi-Axis Fully Compliant Prosthetic Foot for Amputee. The 4th International Conference on Sustainable Energy (4th ICSE), Oct 28th 2015, HCM University of Technology, Vietnam, pp. 223-228.

60.  Tuong Phuoc Tho, Nguyen Truong Thinh, Nguyen Trong Tuan. Solving Inverse Kinematics of Delta Robot Using Anfis. 2015 15th International Conference on Control, Automation and Systems (ICCAS 2015) Oct. 13-16, 2015 in BEXCO, Busan, Korea.

61.  Tuong Phuoc Tho, Nguyen Truong ThinhDesign and development of the sorting system based on robot. 2015 15th International Conference on Control, Automation and Systems (ICCAS 2015) Oct. 13-16, 2015 in BEXCO, Busan, Korea.

62.  Huy-Tuan PhamUsing Cooperative Learning Methods to Develop Students’ Soft Skills: A Case Study with Jigsaw Method for Mechanical Engineering Students. 2015 VEEC Vietnam Engineering Education Conference, Danang University of Science and Technology, March 16-17.

63.  V. A. D. Cai, P. Bidaud, A. Ibanez, T. T. Le, X. T. Phan. In Search of Transparency for Lower Limb Orthosis Devices with a New Mechanical Design and a Robust Phase Detection MethodProceedings of the 2015 IEEE International Conference on Robotics and Biomimetics, At Bali, Indonesia.

64.  Dang Thien Ngon, Le Chi CuongDevelopment of A Welding Procedure for Generating Sidewall Lack of Fusion Defect Using Gas Tungsten Arc Welding. The 3rdInternational Conference on Green Technology and Sustainable Development, Oct. 28th, 2014, pp.125-129.

65.  Le Chi Cuong and Murakami Yuichi. X-Ray Stress Determination For Coarse-Grained Materials with Separation of Doublet Kα Line, Journal of Science and Technology, No. 101, 2014, pp. 182-187.

66.  Tuong Phuoc Tho, Nguyen Truong ThinhIdentifying position ang orientation of object in controlling robot system. The 2nd International Conference on Green Technology and Sustainable Development 2014 (GTSD'14).

67.  Duong Thanh Tung, Nguyen Truong Thinh, Tuong Phuoc ThoPosition prediction delta parallel robot using anfis. The 2nd International Conference on Green Technology and Sustainable Development 2014 (GTSD'14).

68.  Tuong Phuoc Tho and Nguyen Truong ThinhAnalysis of  Kinematics and Dynamics of 4-dof Delta Parallel Robot. Robot Intelligence Technology and Applications 2, Advances in Intelligent Systems and Computing 274,  DOI: 10.1007/978-3-319-05582-4_79, © Springer International Publishing Switzerland 2014.

69.  Jian Zhou, Hoai-Nhan Nguyen, and Hee-Jun Kang. Selecting Optimal Measurement poses for Kinematic Calibration of Industrial Robots. Advances in Mechanical Engineering, vol. 2014, 2014.

70.  Minh-Tai Le, Shyh-Chour Huang. Study on mechanical properties of nanocomposite under nanoindentation using FEM. Proceeding of the 2nd International Conference on Green Technology and Sustainable Development 2014 (GTSD2014), pp 265-270.

71.  Jian Zhou, Hoai-Nhan Nguyen, and Hee-Jun Kang. Simultaneous Identification of Joint Compliance and Kinematic Parameters of Industrial Robots. International Journal of Precision Engineering and manufacturing, Vol. 15, Iss. 11, pp 2257-2264, 2014.

72.  Hoai-Nhan NguyenJian ZhouHee-Jun KangTien-Dung Le. Position Accuracy Improvement of Robots Having Closed-chain Mechanisms. Position Accuracy Improvement of Robots Having Closed-chain Mechanisms.

73.  Nguyen Truong Thinh and Dang Tri Dung. Adaptive Neuro-Fuzzy Control for Ionic Polymer Metal Composite Actuators. Robot Intelligence Technology and Applications 2, Advances in Intelligent Systems and Computing 274,  DOI: 10.1007/978-3-319-05582-4_79, © Springer International Publishing Switzerland 2014.

74.  Huy-Tuan Pham, Quoc-Cuong Tran. Recent Development for Industrial-Scale Severe Plastic Deformation Processes. The 2nd International Conference on Green Technology and Sustainable Development (GTSD2014), HCMC University of Technology and Education, Oct. 30th – 31st, HCM city, Vietnam, pp. 151-156, 2014.

75.  Pham Huy Tuan, Nguyen Van Thai Duong, Nguyen Xuan QuangComputational Modeling and Design of a High-Intensity Ultrasonic Transducer with Extensive Radiator for Food Dehydration. The 2nd International Conference on Green Technology and Sustainable Development (GTSD2014), HCMC University of Technology and Education, Oct. 30th – 31st, HCM city, Vietnam, pp. 234-239, 2014.

76.  Minh-Nguyen Ky and Young-Jin Yum. Mode I fracture toughness analysis of a single-layer graphene sheet. Journal of Mechanical Science and Technology 28 (9), 2014, 3645-3652.

77.  Minh-Ky NguyenInvestigation of mode III fracture toughness single layer graphene sheet using molecular dynamics method. The 2nd International Conference on Green Technology and Sustainable Development 2014 (GTSD'14).

78.  Truong-Thinh Nguyen, Young-Soo Yang, Jae-Woong Kim. An Artificial Neural Network System for Heating-Path rediction in Induction Heating Process for Concave Curved Surface Forming. International Journal of Precision Engineering And Manufacturing, Vol. 15, No. 2, pp. 1-7, 2014.

79.  Truong Nguyen Luan Vu, Moonyong Lee. Smith predictor based fractional-order PI control for time-delay processes. Korean Journal of Chemical Engineering, Vol. 31, No. 8, pp. 1321-1329, 2014.

80.  Truong Nguyen Luan Vu; Nguyen T.N.T.; Park, C.H.; Jung, C. H. Study of composition, heat treatment, and inorganic nanocrystal incorporation for hybrid-solar-cells performance. Journal of the Korean Physical Society, Vol. 67, No. 7, pp. 965-969, 2014.

81.  Trần Ngọc ĐảmIn-House Graduate Training Program - Training in Laboratory. Abstract Book of Vietnam Engineering Education Conference“Transformative Change: Educating the Engineers to Innovate the Future of Vietnam”, Date: March 25-26, 2014.

82.  K.T. Hoang and S.H. Yang. Experimental Study and Process Optimization for Vibration-assisted Dry Micro-WEDM. Journal of Korean Society for Precision Engineering, Vol. 31, No. 3, pp. 215-222, 2014.

83.  Võ Xuân TiếnEnhancing Student Motivation in Foundry Technology using Active Learning and CDIO Practices. Abstract Book of Vietnam Engineering Education Conference “Transformative Change: Educating the Engineers to Innovate the Future of Vietnam”, Date: March 25-26, 2014.

84.  Trương Minh TríHEEAP Training Under One Choice in the Inevitable Integration Period. Abstract Book of Vietnam Engineering Education Conference“Transformative Change: Educating the Engineers to Innovate the Future of Vietnam”, Date: March 25-26, 2014.

85.  V. A. D. Cai and P. BidaudSelf-adjusting isostatic exoskeleton for the elbow joint: Mechanical DesignProceedings of Romansy 2014 XX CISM-IFToMM Symposium on Theory and Practice of Robots and Manipulators, At Moscow, Volume: 22.

86.  Nguyễn TrườngThịnhAdaptive Neuro-Fuzzy Control for Ionic Polymer Metal Composite Actuators. Advances in Intelligent Systems and Computing Volume 274, 2014, pp 939-947, Series ISSN: 2194-5357, A Book Series of  Springer Berlin Heidelberg Publisher.

87.  Pham Huy Tuan, Nguyen Van Khien, Mai Van Trinh. Shape optimization and fabrication of a parametric curved-segment prosthetic foot for amputee. J. Science & Technology: Technical Universities, Vol. 102, pp. 89-95. , 2014.

88.  Võ Xuân TiếnPROJECT - BASED LEARNING - THE PROPER METHOD TO REALIZE CDIO – Experiences from teaching process the major "Metal technology" in University of technology and education HCMC. Conference of CDIO, 12/12/2014, National University HCMC.

89.  Minh-Tai Le, Shyh-Chour Huang. Hexagonal Representative Volume Element for Modeling and Analysis of Mechanical Properties of Carbon Nanotube Reinforced Composites. Applied Mechanics and Materials, Vols. 496-500 (2014) pp 251-254 (EI).

90.  Minh-Tai Le, Shyh-Chour Huang. Modeling and Estimating the Effective Elastic Properties of Carbon Nanotube Reinforced Composites by Finite Element Method. Journal of Engineering Technology and Education, Vol.11, No.2, pp.145-158, June, 2014.

91.  Minh-Tai Le, Shyh-Chour Huang. Modeling and Analysis the Effect of Helical Carbon Nanotube Morphology on the Mechanical Properties of Nanocomposites Using Hexagonal Representative Volume Element. Applied Mechanics and Materials, Vol. 577 (2014) pp 3-6. (EI).

92.  V. A. D. Cai, V. L. Nguyen and P. BidaudInstrumented and Active Exoskeletons for Human Anatomical Joints: Design Methodology and ApplicationsProceedings of the 2014 IEEE International Conference on Robotics and Biomimetics, At Bali, Indonesia, pp. 974-979.

93.  Lê Chí CươngThe Absorption factor in X-ray stress Analysis of Anisotropic material using the Iso-Inclination method. Proceeding of the 15th International Symposium on Eco-materials Processing and Design 2014, Hanoi 12-15 January 2014, ISBN 987-89-5708-236-2.

94.  Le Chi CuongPhase Stress Determination and Simulation for Alumina-Zirconia Composite Having Stress Gradient in Orthopedic Applications, The 15th International Symposium on Eco-materials Processing and Design, Jan 14-16th, 2014

95.  Phạm Huy TuânA tristable compliant micromechanism with two serially connected bistable mechanism. Mechanism and Machine Theory Vol 71 – January 2014, pp: 27-39, Public by Elservier, ISSN: 0094-114X.

96.  Minh-Tai Le, Shyh-Chour Huang. Investigation of effective parameters on mechanical property in nanoindentation of polymer/carbon nanotubes nanocomposite using square representative volume element. Proceeding of the 2nd International Conference on Innovation, Communication and Engineering  2014 (ICICE 2014).

97.  Minh-Tai Le, Shyh-Chour Huang. Numerical Simulation of Nanoindentation of Single Wall Carbon Nanotube Reinforced Epoxy Composite. Proceeding of the 3rdInternational Conference on Engineering and Technology Innovation 2014 (ICETI 2014).

98.  Vu Quang Huy, Nguyen Viet Tuyen, Dang Thai Son, Tran Ngoc Doan. Linear Quadratic Regulator Versus Model Predictive Controller: A Comparision On An Electromagnetic Levitation System. Proceedings of the 2nd International Conference on Green Technology and Sustainable Development 2014.

99.  Vu Quang Huy, Nguyen Viet Tuyen, Dang Thai Son, Tran Ngoc Doan. An Approach To Optimize A Cooling System And Remain Working Condition For Data Center. Proceedings of the 2nd International Conference on Green Technology and Sustainable Development 2014.

100.       Vu Quang Huy, Nguyen Viet Tuyen, Dang Thai Son, Tran Ngoc Doan. Control A Simple Magnetic Levitation System Using LQR. Proceedings of the 2nd International Conference on Green Technology and Sustainable Development 2014.

101.       Tran Van Tron1, Le Chi Cuong1and Dang Thien Ngon1Analysing The Effect Of Cutting Parameters On Machining Complex Surface Using Skd11 Steel, The 3rdInternational Conference on Green Technology and Sustainable Development, Oct. 28th, 2014, pp.116-119.

102.       Nguyen Van Dan, Nguyen Van Thuc, Luong Thi Quynh Anh. The effect of co-precipitation on nanocrystalline structure of ferrite Zn0.64Ni0.36Fe2O4.­ Journal of science and technology -ISSN 0866-708x, 2014.

103.       Nguyen Van Dan, Nguyen Van Thuc, Luong Thi Quynh Anh. Effect of crystal size on magnetic properties of nano-ferrite Zn0.64Ni0.36Fe2O4.­ Science of technology and metals- ISSN 1859-4344, 2014.

104.       Nguyễn Văn Dán, Dương Lê Hùng, Lương Thị Quỳnh Anh, Nguyễn Văn Thức, Phạm Hồng Thạch. Effect of C/Ag concentration in epoxy paint on RADAR absorbence and adhesive strength of absorbing material with steel. Science of technology and metals- ISSN 1859-4344

105.       Dang Minh Phung, Pham Van Canh, Tran Van Tri. Research and development of semi-automatic pineapple peeling and coring machine. Journal of technical education scicence, No.30, 2014.

106.       Fan Jie, Wu Tiecheng, Ye Yan, Bui Ha Duc, Li Xiaoping (2013), “A Magnetic FieldProjector for Deep Brain Modulation ”. IEEE Neural Engineering: 1214 – 1217.

107.       Truong Nguyen Luan Vu, Moonyong Lee. An extended method of simplified decoupling for multivariable processes with multiple time delays. Journal of chemical engineering of Japan Vol. 46, No. 4, pp. 279-293, 2013.

108.       Truong Nguyen Luan Vu, Moonyong Lee. Analytical design of fractional-order proportional-integral controllers for time-delay processes. ISA Transactions, Vol. 52, No. 5, pp. 583-591, 2013.

109.       Huy-Tuan Pham, Quoc-Cuong Tran, Dung-An Wang. Numerical Analysis of the Through-Width Vibration Rolling Process. International Journal of Advanced Transport Phenomena, Vol. 02, No. 01, pp. 21-24., 2013.

110.       Hoai-Nhan NguyenJian ZhouHee-Jun KangYoung Shick Ro. Robot Geometric Parameter Identification with Extended Kalman Filtering Algorithm.  Communications in Computer and Information ScienceVol. 375, of the series, pp 165-170, 2013.

111.       Truong-Thinh Nguyen, Young-Soo Yang, Jae-Woong Kim. An Artificial Neural Network System for Predicting the Deformation of Steel Plate in Triangle Induction Heating Process. International Journal of Precision Engineering and Manufacturing Vol. 14, No.4, Springer, 2013.

112.       Truong Nguyen Luan Vu, Nguyen, T.N.T.,  Park, C.H.; Jung, C. H. Effect of anualling and semiconductor nanoparticle incoporation on the performance of hybrid bulk hetero-junction solar cells. Journal of the Korean Physical Society, Vol. 62, No. 5, pp. 729-738, 2013.

113.       Phạm Ngọc Tuấn, Nguyễn Xuân Quang, Nguyễn Tính, La Thanh Hải. The online whiteness tester. Proceedings of the 3rd National Conference on Mechanical Science &Technology, HCMC November 6th, 2013.

114.       Truong Nguyen Luan Vu, Moonyong Lee. A unified approach to the design of advanced proportional-integral-derivative controllers for time-delay processes. Korean Journal of Chemical Engineering, Vol. 30, No. 3, pp. 546-558, 2013.

115.       Truong Nguyen Luan Vu, Le Hieu Giang, Nguyen Truong Thinh, Dang Thien Ngon, Le LinhFractional-order PI controllers design based on IMC scheme for enhanced performance of dead-time processes. 13th International Conference Control, Automation and Systems (ICCAS), Korea, 2013.

116.       Van Hưu Thinh, Nguyen Thanh Thin. Design, Mannufacturing of a cassava  peeling machine. Vietnam Mechanical engineering journal, ISSN0866-7056, Vol 11/2013.

117.       Đặng Trí Dũng, Nguyễn Trường ThịnhControlling of 5 DOF manipulator based on tele-operation. 8th International Conference on Computing and Convergence Technology ICCCT2013, Korea.

118.       Nguyen Truong Thinh,  Tho Phuoc TuongAnalysis of  Kinematics and Dynamics of 4-dof  Delta parallel robot. The 2nd International Conference on Robot Intelligence Technology and Applications 2013,  USA.

119.       Nguyen Truong Thinh,  Dang Tri Dung. Adaptive Neuro-Fuzzy Controller of IPMC Actuators for Bio-memetics and Bio-medical devices. The 2nd International Conference on Robot Intelligence Technology and Applications 2013,  USA.

120.       Nguyen Truong Thinh, Tuong Phuoc Tho, Trinh Duc Cuong. A Generalized Approach on Design and Control Methods Synthesis of Delta Robot. The 8th International Conference on Information Processing, Management and Intelligent Information Technology (ICIPT 2013), April 1-3, 2013, Seoul, Korea.

121.       Phạm Thị Hồng NgaDevelopment of Multi Purpose Automated Weld Inspecting Equipment". Optics and Precision Engineering Vol 21,No.8,  8/2013 – China, ISSN: 1004-924X.

122.       Phạm Thị Hồng Nga, Trần Thế SanTổ chức tế vi và cơ tính của lớp composite TIC/CO trên bề mặt thép AISI H13 tráng phủ bằng phương pháp laser cladding. Tạp chí Cơ khí Việt Nam Số 9-2013, Trang 58-63, ISSN 0866-7056.

123.       Le Chi Cuong, Dang Thien Ngon and To Thanh Tuan, Research on the Application of Phased Array Ultrasonic Technology to Detect Welding Defects in Butt Weld, Journal of Engineering Technology and Education, KUAS, Taiwan, Vol.9, No.5, ISSN 1813-3851, pp.449-454, 2013 (SCIE paper).

124.       Đặng Thiện Ngôn, Lê Chí CươngNumerical Analysis of the through-width vibration rolling process. International Conference on Aerospace, Mechanical, Automotive and Material Engineering 12-13, Sept 2013 Singapore.

125.       Dang Thien Ngon, Le Chi Cuong and Phan Van Toan. Research And Proposal On Welding Technique For Generating Slag Inclusion Defect, Proceeding of The 3rd National Conference on Mechanical Science & Technology, ISBN 978-604-67-0061-6, No. 3, 639-645, Apr. 2013

126.       Đặng Thiện Ngôn, Lê Chí CươngDevelopment of Multi Purpose Automated Weld Inspecting Equipment". International Conference on Aerospace, Mechanical, Automotive and Material Engineering 12-13, Sept 2013 Singapore.

127.       Nguyễn Trường Thịnh, Tưởng Phước ThọA Generalized Approach on Design and Control Methods Synthesis of Delta Robot. Research Notes in Information Science (RNIS) Vol 13, pp 179-183, 31-05-2013, Publisher: AICIT – Korea.

128.       Le Chi CuongX-Ray Stress Measurement Of Textured SUS316L Stainless Steel Used For Shrouds Of Nuclear Power Plants, Journal of Science and Technology, 92, 110-116, 2013.

129.       Le Chi CuongDetermination of Influence of Isotropy to Absorption Factor in X-Ray Stress Analysis Using Ψ-Type Goniometer, Journal of Engineering Technology and Education, KUAS, Taiwan, Vol.9, No.5, ISSN 1813-3851, pp.411-418, 2013 (SCIE journal).

130.       K.T. Hoang and S.H. Yang. A study on the effect of different vibration-assisted methods in micro-WEDM. Journal of Materials Processing Technology, Vol. 20, No. 9, pp. 1616-1622, 2013.

131.       K.T. Hoang and S.H. Yang. Experimental study of vibration assisted μ-WEDM in gas medium. The 5th   International Conference of Asian Society for Precision Engineering and Nanotechnology, 2013.

132.       K.T. Hoang, S.K. Gopalan and S.H. Yang. Experimental study and modeling of fraction of energy transferred between electrodes in µ-EDM. The 5th International Conference on Manufacturing, Machine Design and Tribology, 2013.

133.       Nguyễn Trường ThịnhControl for Smart Transportation Vehicle Based on Dynamic Model. Advances in Intelligent Systems and Computing Volume 208, 2013, pp 993-1001, Series ISSN: 2194-5357.

134.       Huy-Tuan Pham, Quoc-Cuong Tran, Dung-An Wang. Numerical Analysis of the Through-Width Vibration Rolling Process. The 3rd International Conference on Sustainable Energy (3rd ICSE), Oct 29-30, 2013, HCMC University of Technology, Vietnam, pp. 102-107.

135.       Hai-Dang Nguyen, Huy-Tuan Pham, Dung-An Wang. A miniature pneumatic energy generator using Kármán vortex street. J. Wind Engineering & Industrial Aerodynamics, May 2013, v. 116, pp. 40-48. (SCI), 2013.

136.       Pham Huy-Tuan, Nguyen Van-Khien. A Monolithic Flexural-Based Prosthetic Foot For Amputee. Journal of Engineering Technology and Education, National Kaohsiung University of Applied Sciences, Vol. 9, pp. 461-467, 2013.

137.       Hoai-Nhan Nguyen, Jian Zhou and Hee-Jun Kang. A New Full Pose Measurement Method for Robot Calibration. Sensor, Vol. 13, pp. 9132 – 9147, 2013.

138.       Dung-An Wang, Jyun-Hua Chen, and Huy-Tuan PhamA Constant-Force Bistable Micromechanism. Sensors and Actuators A: Physical, Vol. 189, pp. 481-487, (SCI), 2013.

139.       Nguyễn Trường ThịnhA Method for Controlling Wheelchair Using Hand Gesture Recognition. Advances in Intelligent Systems and Computing Volume 208, 2013, pp 961-970, Series ISSN: 2194-5357.

140.       Quach Van Thiem, Tran  Van Chu. Study on the effect on cycle time on the tensile strength and flexural strength of wood plastic compositeJournal of Technical Education Science, No 24-2013. “HCMUTE”

141.       Quach Van Thiem, Tran  Van Chu. Study on the effect of Hopper’s temperature to die zone on the tensile strength and flexural strength of wood plastic composite. Forestry science and Technology Journal of Viet Nam Forestry University, No 3-2013.

142.       Quach Van Thiem, Tran  Van Chu. Study on the effect of technological parameters of injection process on the tensile strength and flexural strength of wood plastic composite. Forestry science and Technology Journal of Viet Nam Forestry University, No 4-2013.

143.       Trần Ngọc ĐảmFive Pilot Lessons for Preparing Students for Engineering Careers and as Researchers. Kỷ yếu Hội nghị Quốc tế IETEC'13, ĐHSPKT TPHCM ngày 3-6/11/2013.

144.       Nguyễn Minh Khai, Hoàng An Quốc. Improved swiched boost inverter with reducing capacitor voltage stress. IEEE international symposium on industrial electronics, 2013.

145.       Truong Nguyen Luan Vu; Cao, T. T. H. ; Lee, M. Industrial PI controller design of a Smith predictor for optimal servo control of a FOPDT process with output constraint. WASET 2012 International Conference, Japan.

146.       Trần Ngọc Đảm, Toru Sasaki, Takashi Kikuchi, Nob.Harada. Environmental Annealing Thin Metallic Wire By Plasma In Atmospheric Pressure. Conference on Green Technology and Sustainable Development, University of Techniacl Education HCMC, 9/2012.

147.       Le Chi CuongSimulation of Sin2ψ Diagram in Stress Determination of Textured Materials, Green Technology and Sustainable Development, ISBN 978-604-918-021-7, Vol.1, No.1, 201-204, 2012.

148.       Le Chi Cuong and Le Hoang Anh, Analysis for Structure of Nano Ceria Using Fourier Analysis for X-Ray Diffraction Line, Green Technology and Sustainable Development, ISBN 978-604-918-021-7, Vol.1, No.1, 255-259, 2012.

149.       Le Chi Cuong. A new method for phase quantitative determination for high strength doublex ferrite-austenite stainless steel using x-ray diffraction. The 2012 International Conference on Green Technology and Sustainable Development, University of Techniacl Education HCMC, 9/2012.

150.       Le Chi Cuong and Phan Hoàng Mau, X-Ray Stress Analysis For Textured Materials Having Stress Gradient, Journal of Science and Technology, Journal of Science and Technology, No. 90, 119-124, 2012.

151.       Le Chi Cuong. Determination of influence of isotropy to absorption factor in x-ray stress analysis. The 2012 International Conference on Green Technology and Sustainable Development, University of Technical Education HCMC, 9/2012.

152.       Nguyễn Trường Thịnh, Nguyễn Ngọc Phương, Tưởng Phước ThọAc impedance based state of charge dynamic modeling of a lifepo4 battery for hybrid electric vehicle applications. The 2012 International Conference on Green Technology and Sustainable Development, University of Technical Education HCMC, 9/2012.

153.       Nguyễn Trường Thịnh, Nguyễn Ngọc Phương, Tưởng Phước ThọAutomatic cleaning system for chemical tanks. The 2012 International Conference on Green Technology and Sustainable Development, University of Technical Education HCMC, 9/2012.

154.       Đặng Thiện Ngôn, Vũ Văn Minh. Development of quantitative machine for coal using in the tuynel brick production line for coal using in the tuynel brick production line. The 2012 International Conference on Green Technology and Sustainable Development, University of Technical Education HCMC, 9/2012.

155.       Đặng Thiện Ngôn, Thái Văn Giáp. Research and development of the technology, equipment for manufacturing rubber membrane diffuser. The 2012 International Conference on Green Technology and Sustainable Development, University of Technical Education HCMC, 9/2012.

156.       Đặng Thiện NgônLe Chi Cuong, Tô Thanh Tuấn. Research On The Application Of Phased Array Ultrasonic Technology To Detect Welding Defects In Butt Weld. The 2012 International Conference on Green Technology and Sustainable Development, University of Technical Education HCMC, 9/2012.

157.       Nguyễn Trường Thịnh, Nguyễn Ngọc Phương, Tưởng Phước ThọAutonomous inspection with multi-link robotic fish. The 2012 International Conference on Green Technology and Sustainable Development, University of Technical Education HCMC, 9/2012.

158.       Nguyễn Trường Thịnh, Nguyễn Ngọc Phương, Tưởng Phước ThọDevelopment of the simultaneous mapping system for the robotic fish. The 2012 International Conference on Green Technology and Sustainable Development, University of Technical Education HCMC, 9/2012.

159.       Lê Hiếu Giang, Huang Shyh-Chour. Effect of Moiture on Fracture Properties of Fiber-Reinforced Polyamide 66. Advance Science, Engineering and Medicine, American Scientific Publishers, Vol 4, pp 1-5, 2/2012, ISSN: 2164-6627 (print); EISSN: 2164-6635.

160.       Đỗ Thành TrungDesign and manufacturing of the upper arm using polymer matrix composite. The 2012 International Conference on Green Technology and Sustainable Development, University of Technical Education HCMC, 9/2012.

161.       Đỗ Thành Trung. The optimal design of composite leaf spring for light weight vehicle. The 2012 International Conference on Green Technology and Sustainable Development, University of Technical Education HCMC, 9/2012.

162.       Truong Nguyen Luan Vu, Moonyong Lee. Enhanced Simplified Decoupling for multivariable processes with multiple time delays. The 31st IASTED Asian Conference on Modelling, Identification, and Control, Thailand, 2012.

163.       Bui Ha Duc and Li XiaoPing (2012). “Functional neuroimaging of circadian fatigue”. Int. J.Computer Applications in Technology 45(2):156-162

164.       Dung-An Wang, Chun-Yuan Chiu, Huy-Tuan PhamElectromagnetic Energy Harvesting from Vibrations Induced by Kármán Vortex Street. Mechatronics, Vol. 22, pp. 746-756 (SCI), 2012.

165.       K.T. Hoang, T. Gurussamy, S.K. Gopalan and S.H. Yang. Study on machining characteristic of titanium alloy in micro-WEDM. Korean Society for Precision Engineering Spring Conference, 2012.

166.       Huu-Tu Nguyen, Huy-Tuan Pham, and Dung-An Wang. A Switching Scheme for a Compliant Bistable Mechanism Using Harmonic Forcing. The 29th Annual Meeting of Chinese Society of Mechanical Engineers (CSME), Dec 7-8, National Sun Yat-sen University, Kaoshiung, Taiwan, 2012.

167.       Quach Van ThiemResearch on using sawdust, shaving for the production of wood plastic compositeInternational conference on green technology and sustainable development, Volume 1-2012.

168.       V. A. D. Cai, P. Bidaud, V. Hayward and F. GosselinKinematic Measurement of the Knee Joint using Self-Adjusting Isostatic ExoskeletonArticle in Journal of Biomechanics 45:S517, July 2012.

169.       Pham Huy Tuan, Nguyen Van Khien. A Monolithic Flexural-Based Prosthetic Foot For Amputee. The 2012 International Conference on Green Technology and Sustainable Development (GTSD2012), HCM city University of Technical Education, Sept 29th – 30th, HCM city, Vietnam.

170.       Truong Nguyen Luan Vu, Moonyong Lee. Design of fractional-order PI controller with smith predictor for processes with time delay. Korea Institute of Chemical Engineering, 2012.

171.       Truong Nguyen Luan Vu, Moonyong Lee. Design of extended simplified decoupling for multivariable processes with multiple time delays. 11th International Conference Control, Automation and Systems (ICCAS), Korea, 2011.

172.       Nguyễn Trường Thịnh, Nguyễn Đăng Phúc. A solution of Obstacle Collision Avoidance for Robotics Fish based on fuzzy systems. Proceeding of the 2011 IEEE International Conference on Robotics and Biominetics, Dec 7-11, 2011, Phuket, Thailand.

173.       Nguyễn Ngọc Phương, Tưởng Phước Thọ, Nguyễn Trường ThịnhA study of pipe-cleaning and inspection robot. Proceeding of the 2011 IEEE International Conference on Robotics and Biominetics, Dec 7-11, 2011, Phuket, Thailand.

174.       Truong Nguyen Luan Vu, Moonyong Lee. Analytical tuning rules for fractional order proportional integral controllers. 11th International Conference  Control, Automation and Systems (ICCAS), Korea, 2011.

175.       Le Chi CuongDevelopment of Automated Weld Identification Robot, Journal of Technical Education, ISSN 1859-1272, No. 21, 2011, 51-56.

176.       Dang Thien Ngon. CAD/CAM/CNC Technology - Present applications and development trends in the future. International Conferenceon Science and Technology, pp. 670-677, Hanoi, Vietnam - Nov. 2011.

177.       Đỗ Thành Trung and Dong Joo Lee. Degradation in tensile properties of composites. Journal of Advanced Composite Materials, Vol. 20, 2011.

178.       Nguyễn Ngọc Phương, Nguyễn Trường ThịnhDesign and Development of Continuum Structure for Robotic Flower. Proceeding of the 2011 IEEE International Conference on Robotics and Biominetics, Dec 7-11, 2011, Phuket, Thailand.

179.       Le Chi Cuong and. Research on Design and Fabrication of Automated Inspecting Equipment Using Phased Array Ultrasonic Technique, Vietnam Journal of Mechanics, Vol. 12, 8-13, 2011.

180.       Truong Nguyen Luan Vu, Moonyong Lee. Analytical Tuning Rules for Fractional Order Proportional Integral controllers. International Conference on Control, Automation and Systems, in Kintex, Gyeonggi-do, Korea, pp. 1534-1539, 2011.

181.       Truong Nguyen Luan Vu, Moonyong Lee. Analytical Design of PID Controller for Improved Disturbance Rejection of Delay-Free Processes. Korean Chemical Engineering Research, Vol. 49, No. 5, pp. 565-570, 2011.

182.       Văn Hữu ThịnhExperimental researches on the flexural stiffness EJ of fatigue testing specimens made of AISI 1045 steel. International Conference on Science and Technology, 45th Anniversary of Electric Power University, Nov, 2011.

183.       Đặng Minh Nhật, Nguyễn Trường ThịnhDevelopment of the Simultaneous Mapping System for the Robotic Fish. Proceeding of the 2011 IEEE International Conference on Robotics and Biominetics, Dec 7-11, 2011, Phuket, Thailand.

184.       Nguyễn Trường Thịnh, Nguyễn Ngọc Phương, Đặng Minh Nhật. Swimming of Robotic Fish based Biologically-Inspred approach. 11th International Conference on Control, Automation and Systems, Oct. 26-29, 2011 in Kintex, Gyeoggi-do, Korea.

185.       Dang Thien Ngon, Nguyễn Trường ThịnhThe Production of Tuynel Bricks Associated with Environmental Protection. 1st International Conference on the Advances in Environmental Engineering for Natural Resources Mining, 22-24 June 2011 in Hanoi, Vietnam.

186.       Nguyễn Trường ThịnhUsing Artifical Neural Network to predict locations of Induction heating lines in forming process. 11th International Conference on Control, Automation and Systems, Oct. 26-29, 2011 in Kintex, Gyeoggi-do, Korea.

187.       Nguyễn Trường ThịnhUsing Electooculogram and Electromyogram for powered wheelchair. Proceeding of the 2011 IEEE International Conference on Robotics and Biominetics, Dec 7-11, 2011, Phuket, Thailand.

188.       Nguyễn Ngọc Phương, Tưởng Phước Thọ, Nguyễn Trường ThịnhUsing image processing to control traffic flow based on Robot. 11th International Conference on Control, Automation and Systems, Oct. 26-29, 2011 in Kintex, Gyeoggi-do, Korea.

Comments
Full Name: *  
Email: *  
Title: *  
Captcha:
 
 
   
  
 
 
   
 *

QUESTION & ANSWER

KEY ANSWERS OF EXAMINATION



FACEBOOK

Copyright © 2013, Ho Chi Minh City University of Technology and Education

Add: 01 Vo Van Ngan St, Thu Duc Dist, Ho Chi Minh City.

Tell: (+84 - 8) 38968641 - (+84 - 8) 38961333

E-mail: kckctm@hcmute.edu.vn