PUBLICATIONS OF THE FME's FACULTY MEMBERS (update to 2018)

L Masia, I Hussain, M Xiloyannis, C Pacchierotti, L Cappello, M Malvezzi, ..., Soft wearable assistive robotics: exosuits and supernumerary limbs, Wearable Exoskeleton Systems: Design, control and applications, 219-254, 2018

L Masia, M Xiloyannis, DB Khanh, AC Wilson, S Contu, KG Yongtae, Actuation for robot-aided rehabilitation: Design and control strategies, Rehabilitation Robotics, 47-61, 2018

BK Dinh, M Xiloyannis, CW Antuvan, L Cappello, L Masia, Hierarchical cascade controller for assistance modulation in a soft wearable arm exoskeleton, IEEE Robot. Autom. Lett. 2 (3), 1786-1793, 2017

BK Dinh, M Xiloyannis, L Cappello, CW Antuvan, SC Yen, L Masia, Adaptive backlash compensation in upper limb soft wearable exoskeletons, Robotics and Autonomous Systems 92, 173-186, 2017

M Xiloyannis, L Cappello, KD Binh, CW Antuvan, L Masia, Preliminary design and control of a soft exosuit for assisting elbow movements and hand grasping in activities of daily living, Journal of Rehabilitation and Assistive Technologies Engineering 4 …, 2017

M Xiloyannis, L Cappello, BK Dinh, CW Antuvan, L Masia, Design and Preliminary Testing of a Soft Exosuit for Assisting Elbow Movements and Hand Grasping, Converging Clinical and Engineering Research on Neurorehabilitation II, 557-561, 2017

BK Dinh, L Cappello, M Xiloyannis, L Masia, Control using adaptive backlash compensation for bowden cable transmission in soft wearable exoskeleton, Intelligent Robots and Systems (IROS), 2016 IEEE/RSJ International …, 2016

L Cappello, DK Binh, SC Yen, L Masia, Design and preliminary characterization of a soft wearable exoskeleton for upper limb, Biomedical Robotics and Biomechatronics (BioRob), 2016 6th IEEE … 2016

BK Dinh, L Cappello, L Masia, Localized Extreme Learning Machine for online inverse dynamic model estimation in soft wearable exoskeleton, Biomedical Robotics and Biomechatronics (BioRob), 2016 6th IEEE …, 2016

TNL Vu, N Van Trang, PT Hai, Analytical design of PID controller for enhancing ride comfort of active vehicle suspension system, System Science and Engineering (ICSSE), 2017 International Conference on … 2017

VL Chuong, TNL Vu, Identification and Dynamic Matrix Control algorithm for a heating process, System Science and Engineering (ICSSE), 2017 International Conference on …2017

TNL Vu, L Linh, VL Chuong, Advanced IMC-PID controller design for the disturbance rejection of first order plus time delay processes, System Science and Engineering (ICSSE), 2017 International Conference on …2017

L Linh, TNL Vu, Design of IMC-PID Controller Cascaded Filter for Simplified Decoupling Control System, World Academy of Science, Engineering and Technology, International Journal …2016

TNL Vu, L Linh, Le Hieu Giang, Fractional-Order PI Controller Tuning Rules for Cascade Control System, World Academy of Science, Engineering and Technology, International Journal …2016

TNL Vu, L Linh, Analytical Design of IMC-PID Controller for Ideal Decoupling Embedded in Multivariable Smith Predictor Control System, World Academy of Science, Engineering and Technology, International Journal …2016

Pham Huy Tuan, Minh-Nhat Le, Van-Trinh Mai. A Novel Multi-axis Compliant Prosthetic Ankle Foot to Support the Rehabilitation of Amputees. The 3rd International Conference on Green Technology and Sustainable Development, GTSD 2016, 24-25 November 2016, Kaohsiung, Taiwan, ISBN 978-1-5090-3638-7, DOI 10.1109/GTSD.2016.61, pp 238-241.

Phan Công Bình, Tri Dung Dang, Hoai Vu Anh Truong, Chau Duy Le, Minh Tri Nguyen, Kyoung Kwan Ahn. A study on modeling of a hybrid wind wave energy converter system. 016 16th International Conference on Control, Automation and Systems (ICCAS 10/2016).

Ngon Dang Thien, Dat Le Quang, Toan Phan Van, Tuan Tao Anh. A Welding Temperature Determination Method of Low Carbon Steel and Stainless Steel Welded Joint by Rotary Friction Welding Process. The 3rd International Conference on Green Technology and Sustainable Development, GTSD 2016, 24-25 November 2016, Kaohsiung, Taiwan, ISBN 978-1-5090-3638-7, DOI 10.1109/GTSD.2016.55, pp 206-211.

Ngon Dang Thien, Giang Nguyen Truong. An Approach To Design A Globoid CAM Using CREO Parametric 3.0. The 3rd International Conference on Green Technology and Sustainable Development, GTSD 2016, 24-25 November 2016, Kaohsiung, Taiwan, ISBN 978-1-5090-3638-7, DOI 10.1109/GTSD.2016.54, pp 200-205.

Pham Huy Tuan, Nguyen Xuan Quang, Nguyen Ngoc Phuong. Design and Fabrication of a High-Intensity Ultrasonic Transducer for Food Dehydration (in Vietnamese). J. Science & Technology: Technical Universities, Vol. 110, 2016.

Lê Chí Cương and Đặng Thiện Ngôn, Study on the Influence between Cutting Speed and Surface Layer Residual Stress of Cold-Forging Mold after CNC Wire Cutting Machining Using X-Ray Diffraction, Journal of Science and Technology, 2015.

L.A. Tuyen^a, e, , E. Szilágyi^b, E. Kótai^b, K. Lázár^c, L. Bottyán^b, T.Q. Dung^a, L.C. Cuong^d, D.D. Khiem^a, P.T. Phuc^a, L.L. Nguyen^a,P.T. Hue^a, N.T.N. Hue^a, C.V. Tao^e, H.D. Chuong^e, Structural Effects Induced by 2.5MeV Proton Beam on Zeolite4A: Positron Annihilation and X-Ray Diffraction Study, Radiation Physics and Chemistry, Elsevier, Vol.106, Jan. 2015, pp.335-339 (SCI Journal). ISSN: 0969-806X, IF 1.3.

Nguyễn Trường Thịnh, Nguyễn Ngọc Phương, Nguyễn Trọng Tuấn. Planning walking trajectory for a biped robot. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 2, pp. 3-12.

Nguyễn Trọng Tuấn, Nguyễn Trường Thịnh. Design of robotic lawn mower. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 2, pp. 13-22.

Đặng Thiện Ngôn, Phan Van Toan. Research and proposal on welding technique for longitudinal crack defect welding. International Journal of Mechanical Engineering and Applications, Science Publishing Group, ISSN 2330-0248, Vol. 3, No 1-3, 2/2015: Pp. 29-34.

Đặng Thiện Ngôn, Huy-Bich Nguyen. A Study on Durian Processing Technology and Defleshing Machine. Asia Pacific Journal of Sustainable Agriculture Food and Energy (APJSAFE), ISSN 2338-1345, Vol. 3, No 1 (4/2015): Pp. 12-16.

Đặng Thiện Ngôn, Ngô Ngọc Tuyền, Nguyễn Văn Trung. The research on applying-ability of aerostatic bearings for centrifugal machine. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 1, pp. 44-52

Đặng Thiện Ngôn, Tôn Thất Tín, Dương Văn Ba. Effect of nozzle structure on the peeling ability of garlic peeled by pneumatic. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 1, pp. 53-60.

Đặng Thiện Ngôn, Huỳnh Tấn Đạt. Simulation to determine the structure of windcube for small horizontal-axis wind turbine. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 1, pp. 594-601.

Phạm Sơn Minh, Đỗ Thành Trung. Verification of External Gas-Assisted Mold Temperature Control for Injection Molding Process. Applied Mechanics and Materials, Volumes 752-753, pp 949-954, ISSN 1662-7482, 4/2015.

Phạm Sơn Minh, Đỗ Thành Trung, Trần Minh Thế Uyên, Phạm Thanh Bình. Application of cae to design the waste heat recovery from the internal combustion engines. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 1, pp. 594-601.

Phạm Sơn Minh, Đỗ Thành Trung, Trần Minh Thế Uyên, Phan Thế Nhân. Effect of part thickness and mold temperature on the warpge of polypropylene plate. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 2, pp. 536-543.

Đỗ Thành Trung, Phạm Sơn Minh. Effect of temperature control on the pulsed cooling process in injection molding with P20 mold steel and polycarbonate material. Journal of Science & Technology - Technical Universities, No. 104, 2015, p. 78-82.

Nguyễn Vũ Lân, Hsiao Ming Chien. Improvement of microwave effect on Biodiesel transesterification process by using activated carbon. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 1, pp. 666-673.

Lê Linh, Trương Nguyễn Luân Vũ, Lê Hiếu Giang. Design of multi-loop controller for simplified decoupling system. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 2, pp. 23-29.

Dang Minh Phung, Le Hieu Giang, Nguyen Van Lam, Nguyen Truong Hai, Le Tan Cuong. Reseaching design and manufacturing 4-axis CNC milling machine using Mach3 software applied to manufacture aluminium and ferrous metals. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 1, pp. 112-120.

Dang Minh Phung, Nguyen Dang Khoa, Truong Nguyen Luan Vu, Le Minh Tuan. Reseaching design development and manufacturing the cocoa pod cutting machine. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 1, pp. 934-942.

Lê Phan Hưng, Nguyễn Trường Thịnh. Driving kinetic model and combining control method on autonomous car. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 2, pp. 30-38.

Nguyễn Xuân Quang, Nguyễn Hay, Nguyễn Ngọc Phương, Bùi Ngọc Hùng. Study on influence of ultrasound pre-treatment on the drying rate and color of vietnamese grinseng. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 1, pp. 832-837.

Lê Chí Cương, Nguyễn Vĩnh Phối, Nguyen Trong Thanh. Determination of generalized absorption function using X-ray diffraction on ellipsoid surface using ψ measurement method. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 2, pp. 337-344.

Nguyễn Minh Khai, YoungCheol Lim, Sung-Jun Park. A Comparison Between Single-Phase QuasiZ -Source and Quasi-Switched Boost Inverters. Industrial Electronics, IEEE Transactions on Volume: 62, Issue: 10, Page(s): 6336 - 6344, ISSN : 0278- 0046, Oct. 2015

Le Chi Cuong^1,a, Nguyen Trong Thanh and Luu Anh Tuyen^2,b . Determination of Thickness of Coating Thin Films Using X-ray Diffraction. Journal of Science and Technology, Vol. 105A, 2015, pp. 51-55.

Minh-Tai Le, Shyh-Chour Huang. Investigation of effective parameters on  mechanical property in nanoindentation of polymer/carbon nanotubes nanocomposite using square representative volume element. International Conference on Innovation, Communication and Engineering 2014, Taylor & Francis Group,  2015 (EI).

Minh-Tai Le, Shyh-Chour Huang. Numerical Simulation of Nanoindentation of Single Wall Carbon Nanotube Reinforced Epoxy Composite. Applied Mechanics and Materials Vols. 764-765 (2015) pp 66-70 (EI).

Hoai-Nhan Nguyen, Jian Zhou and Hee-Jun Kang. A calibration method for enhancing robot accuracy through integration of an extended Kalman filter algorithm and an artificial neural network. Neurocomputing , Vol. 151, Part 3, pp. 996–1005, 2015.

Le Chi Cuong and Nguyen Vinh Phoi. The Absorption Funtion Of Materials Using X-Ray Diffraction Method. International Conference on Multiphysical Interaction and Environment, March 09-10^th, 2015.

Le Chi Cuong and Nguyen Trong Anh Tuan. Computation of Phase Stress of Dual Phase Ferrite-Austenite Stainless Steel Using X-Ray Diffraction. International Conference on Multiphysical Interaction and Environment, March 09-10^th, 2015.

Le Chi Cuong and Phan Thanh Vu. Phase Stress Determination for Triple-Phase Ceramic WC-TiC-Co Using X-Ray Diffraction-Isotropic Case. International Conference on Multiphysical Interaction and Environment, March 09-10^th, 2015.

Quach Van Thiem, Tran  Van Chu. Study on the effect of Anti-oxidant additives on the tensile strength and flexural strength of wood plastic composite. Forestry science and Technology Journal of Viet Nam Forestry University, No 1-2015.

K.T. Hoang and S.H. Yang. Study of energy distribution to electrodes in a micro-EDM process by utilizing the electro-thermal model of single discharges. Journal of Mechanical Science and Technology, Vol. 29, No.1, pp. 349-356, 2015.

K.T. Hoang and S.H. Yang. A new approach for micro-WEDM control based on real-time estimation of material removal rate. International Journal of Precision Engineering and Manufacturing, Vol. 16, No.2, pp. 241-246, 2015.

K.T. Hoang and S.H. Yang. Kerf analysis and control in dry micro-wire electrical discharge machining. International Journal of Advanced Manufacturing Technology, Vol. 78, No.9-12, pp. 1803-1812, 2015.

Nguyễn Trường Thịnh, Tưởng Phước Thọ,  Nguyễn Ngọc Phương. Design and development reception robot. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 2, pp. 217-224.

Thái Văn Phước, Trần Ngọc Đảm. Effects of cold-plasma at atmospheric pressure on killing of s.aureus on cold tissue. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 1, pp. 654-658.

Thái Văn Phước, Trần Ngọc Đảm. Influency of cold-plasma at atmospheric on effect of surface pretreatment of plastic PP. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 2, pp. 373-377.

Dang Minh Phung, Le Hieu Giang, Le Linh, Truong Nguyen Luan Vu, Tran Tien Phat. Reseaching design development and manufacturing the gear hobbing CNC machine served in education. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 1, pp. 223-232.

Hoang An Quoc, Nguyen Vu Lan, Nguyen Thanh Quang, Nguyen Ngoc Tuyen. A study on factors that affect on the fixed bed gasification process. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 1, pp. 513-518.

Dương Đăng Danh. Apply the inverson method to mechanism synthesis. Kỷ yếu Hội nghị Máy và Cơ cấu  toàn quốc NCOMM 2015, ngày 30/10/2015, Tp.HCM.

Nguyễn  Thanh Tân, Nguyễn Thị Hồng Minh, Phạm Huy Tuân. The shortest-path algorith in flat pattern generation. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 2, pp. 217-224.

Trần Văn Trọn. Research and develop a electroplating machine to improve the quality of plating layer on machine part’s surface. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 2, pp. 329-336.

Phạm Thị Hồng Nga, Võ Ngọc Yến Phương, Trần Ngọc Thiện, Trần Thế San, Yehua JIANG. MICROSTRUCTURE AND HIGH-TEMPERATURE WEAR BEHAVIORS OF Co/tic LASER COATINGS ON TOOL STEEL. Proceedings of the 4^thNational Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 2, pp. 378-385.

Lê Phan Hưng, Nguyễn Trường Thịnh. Motion prediction of lung tumour based on NLMS algorithm. Proceedings of the 4^thNational Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 2, pp. 39-48.

Tưởng Phước Thọ Nguyễn Trường Thịnh,  Nguyễn Ngọc Phương. Design and development 3D robot. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 2,  pp. 188-197.

Minh-Tai Le, Shyh-Chour Huang. Mechanical Characterization of Carbon Nanotube Reinforced Polymer Nanocomposite by Nanoindentation Using FEM”, Sensors and Materials. Sensors and Materials, Vol. 27, No. 8,  9/2015, pp. 617-624, IF: 0.46, doi: 10.18494/SAM.2015.1098 (SCIE).

Minh-Tai Le, Shyh-Chour Huang. Effect of nano-fillers on the strength reinforcement of novel hybrid polymer nanocomposites. Materials and Manufacturing Processes, 5/2015, IF: 1.63, doi: 10.1080/10426914.2015.1048365 (SCIE).

Minh-Tai Le, Shyh-Chour Huang. Fabrication and characterization of SWCNT-reinforced Polyester nanocomposites using Tensile test and Nanoindentation techniques. Advanced Materials Letters, 2015, Vol. 6, No. 8, pp. 711-716, doi: 10.5185/amlett.2015.5821 (ISI).

Van Hưu Thinh, Lo Xuan Khai. Designing and manufacturing a plastering machine. Vietnam Mechanical engineering journal, ISSN0866-7056, Vol 6/2015.

Van Hưu Thinh, Nguyen Thoai Khanh. Design, Mannufacturing of a cocoa pod splitting machine. Vietnam Mechanical engineering journal, ISSN0866-7056, Vol 6/2015.

Van Hưu Thinh, Le Quang Hung. Design and analysis procedure of derrick on jack up rig. Vietnam Mechanical engineering journal, ISSN0866-7056 Vol 11/2015.

Shyh-Chour Huang, Minh-Tai Le. Optimal design of process parameters,  experimental fabrication and characterisation of a novel hybrid polymer nanocomposite. International Journal of Materials and Product Technology (Special Issue on: "Synthesis, Characterisation and Applications of Nanocomposite Materials),  9/2015 (SCIE).

Minh-Tai Le, Shyh-Chour Huang. Thermal and mechanical behavior of hybrid polymer nanocomposite reinforced with Graphene nanoplatelets. Materials, 2015, Vol. 8, No. 8, pp. 5526-5536; doi:10.3390/ma8085262 (SCIE).

Minh-Tai Le, Shyh-Chour Huang. Reinforcement of Strength of Epoxy/Polyester blend composite using Graphene Nanoplatelets. Proceeding of International Conference on Applied System Innovation 2015 (ICASI2015).

Đỗ  Văn Hiến. A refined Finite Element Method (h-FEM, p-FEM) applied to free Vibration of  Truss Structures. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 2, pp. 884-889.

Phạm Huy Tuân, Nguyễn Hà Ngọc Hiếu, Lê Minh Nhật. Design of a constant force mechanism for robot end effector. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 2, pp. 79-86.

Van Linh Tran, Quang Vinh Bui, Tuan Anh Nguyen, Xuan Hao Nguyen, Cong Bang Pham, Viet Anh Dung Cai. Study, design and control robot palletizer. Proceedings of the 4^th National Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 2, pp. 130-139.

Van Hưu Thinh, Nguyen  Tien Dung. Designing and manufacturing Carrots machine. Proceedings of national conference on machines and mechanisms 2015 (NCOM 2015), 1^st November, 2015.

Văn Hữu Thịnh, Nguyễn Thoại Khanh. Research, design of the cocoa beans separator machine. Proceedings of the 4^thNational Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 1, pp. 707-713.

Cái Việt Anh Dũng, Nguyễn Minh Triết, Nguyễn Việt Thắng, Nguyễn Ngọc Phương, Nguyễn Trọng Thịnh, Nguyễn Hoàn Dzũ, Nguyễn Văn Bách, Lưu Bảo Ngọc. Robotic tele-operation system using haptic force. Proceedings of the 4^thNational Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 2, pp. 121-129.

Nguyễn Văn Khiển, Phạm Huy Hoàng, Phạm Huy Tuân. Flexure mechanism and applications. Proceedings of the 4^thNational Conference on Mechanical Science &Technology, HCMC November 6^th, 2015, vol. 2, pp. 778-786.

Huy-Tuan Pham, Minh-Nhat Le, Van-Khien Nguyen. Design of a Multi-Axis Fully Compliant Prosthetic Foot for Amputee. The 4^th International Conference on Sustainable Energy (4^th ICSE), Oct 28^th 2015, HCM University of Technology, Vietnam, pp. 223-228.

Tuong Phuoc Tho, Nguyen Truong Thinh, Nguyen Trong Tuan. Solving Inverse Kinematics of Delta Robot Using Anfis. 2015 15th International Conference on Control, Automation and Systems (ICCAS 2015) Oct. 13-16, 2015 in BEXCO, Busan, Korea.

Tuong Phuoc Tho, Nguyen Truong Thinh. Design and development of the sorting system based on robot. 2015 15th International Conference on Control, Automation and Systems (ICCAS 2015) Oct. 13-16, 2015 in BEXCO, Busan, Korea.

Huy-Tuan Pham. Using Cooperative Learning Methods to Develop Students’ Soft Skills: A Case Study with Jigsaw Method for Mechanical Engineering Students. 2015 VEEC Vietnam Engineering Education Conference, Danang University of Science and Technology, March 16-17.

V. A. D. Cai, P. Bidaud, A. Ibanez, T. T. Le, X. T. Phan. In Search of Transparency for Lower Limb Orthosis Devices with a New Mechanical Design and a Robust Phase Detection Method. Proceedings of the 2015 IEEE International Conference on Robotics and Biomimetics, At Bali, Indonesia.

Lê Hiếu Giang, Shyh-Chour Huang, Van Son Nguyen, Thanh-Phong Dao. Investigation on the effect of micro-fillers on the strength reinforcement of polypropylene. Advanced Materials Letters, Volume 5, Issue 10, Page 593-597, Oct 2014, ISSN 0976-3961.

Nguyễn Minh Khai. Cascaded Five-Level Embedded-Type Switched Boost Inverter. Journal of Advanced Engineering and Technology, Vol. 7, No. 3 September 2014, Chosun University, Korea, ISSN : 2005-3142.

Nguyễn Minh Khai, TuanVu Le, Sung-Jun Park, and Young-Cheol Lim. A Class of Quasi-Switched Boost Inverters. IEEE Transactions On Industrial Electronics DOI 10.1109/TIE.2014.2341564 Online Publication: 7/2014 ISSN 0278-0046.

Phạm Sơn Minh, Trần Minh Thế Uyên. Numerical Study on Flow Length in Injection Molding Process with High-Speed Injection Molding. International Journal of Mechanical Engineering and Applications, Vol 2 Issue 5, Pages: 58-63, Oct. 24, 2014 ISSN:2330-023X.

Phạm Sơn Minh. Study on the Mold Temperature Control for the Core Plate during Injection Molding Process. IOSR Journal of Polymer and Textile Engineering, Vol 1, Issue 4, Sep-Oct 2014, pp 14-20, ISSN 2348- 0181.

Phạm Sơn Minh, Phan The Nhan. Effect of CaCO3 Additive on the Warpage of Injection Molding Part. Universal Journal of Mechanical Engineering, Vol 2 (Dec, 2014) No 9, pp. 280 – 286, ISSN: 2332-3353.

Dang Thien Ngon, Le Chi Cuong. Development of A Welding Procedure for Generating Sidewall Lack of Fusion Defect Using Gas Tungsten Arc Welding. The 3^rd International Conference on Green Technology and Sustainable Development, Oct. 28^th, 2014, pp.125-129.

Le Chi Cuong and Murakami Yuichi. X-Ray Stress Determination For Coarse-Grained Materials with Separation of Doublet Kα Line, Journal of Science and Technology, No. 101, 2014, pp. 182-187.

Tuong Phuoc Tho, Nguyen Truong Thinh. Identifying position ang orientation of object in controlling robot system. The 2nd International Conference on Green Technology and Sustainable Development 2014 (GTSD'14).

Duong Thanh Tung, Nguyen Truong Thinh, Tuong Phuoc Tho. Position prediction delta parallel robot using anfis. The 2nd International Conference on Green Technology and Sustainable Development 2014 (GTSD'14).

Tuong Phuoc Tho and Nguyen Truong Thinh. Analysis of  Kinematics and Dynamics of 4-dof Delta Parallel Robot. Robot Intelligence Technology and Applications 2, Advances in Intelligent Systems and Computing 274,  DOI: 10.1007/978-3-319-05582-4_79, © Springer International Publishing Switzerland 2014.

Jian Zhou, Hoai-Nhan Nguyen, and Hee-Jun Kang. Selecting Optimal Measurement poses for Kinematic Calibration of Industrial Robots. Advances in Mechanical Engineering, vol. 2014, 2014.

Minh-Tai Le, Shyh-Chour Huang. Study on mechanical properties of nanocomposite under nanoindentation using FEM. Proceeding of the 2^nd International Conference on Green Technology and Sustainable Development 2014 (GTSD2014), pp 265-270.

Jian Zhou, Hoai-Nhan Nguyen, and Hee-Jun Kang. Simultaneous Identification of Joint Compliance and Kinematic Parameters of Industrial Robots. International Journal of Precision Engineering and manufacturing, Vol. 15, Iss. 11, pp 2257-2264, 2014.

Hoai-NhanNguyen, Jian Zhou, Hee-Jun Kang, Tien-Dung Le. Position Accuracy Improvement of Robots Having Closed-chain Mechanisms. Position Accuracy Improvement of Robots Having Closed-chain Mechanisms.

Nguyen Truong Thinh and Dang Tri Dung. Adaptive Neuro-Fuzzy Control for Ionic Polymer Metal Composite Actuators. Robot Intelligence Technology and Applications 2, Advances in Intelligent Systems and Computing 274,  DOI: 10.1007/978-3-319-05582-4_79, © Springer International Publishing Switzerland 2014.

Huy-Tuan Pham, Quoc-Cuong Tran. Recent Development for Industrial-Scale Severe Plastic Deformation Processes. The 2^nd International Conference on Green Technology and Sustainable Development (GTSD2014), HCMC University of Technology and Education, Oct. 30^th – 31^st, HCM city, Vietnam, pp. 151-156, 2014.

Pham Huy Tuan, Nguyen Van Thai Duong, Nguyen Xuan Quang. Computational Modeling and Design of a High-Intensity Ultrasonic Transducer with Extensive Radiator for Food Dehydration. The 2^nd International Conference on Green Technology and Sustainable Development (GTSD2014), HCMC University of Technology and Education, Oct. 30^th – 31^st, HCM city, Vietnam, pp. 234-239, 2014.

Minh-Nguyen Ky and Young-Jin Yum. Mode I fracture toughness analysis of a single-layer graphene sheet. Journal of Mechanical Science and Technology 28 (9), 2014, 3645-3652.

Minh-Ky Nguyen. Investigation of mode III fracture toughness single layer graphene sheet using molecular dynamics method. The 2nd International Conference on Green Technology and Sustainable Development 2014 (GTSD'14).

Truong-Thinh Nguyen, Young-Soo Yang, Jae-Woong Kim. An Artificial Neural Network System for Heating-Path rediction in Induction Heating Process for Concave Curved Surface Forming. International Journal of Precision Engineering And Manufacturing, Vol. 15, No. 2, pp. 1-7, 2014.

Truong Nguyen Luan Vu, Moonyong Lee. Smith predictor based fractional-order PI control for time-delay processes. Korean Journal of Chemical Engineering, Vol. 31, No. 8, pp. 1321-1329, 2014.

Truong Nguyen Luan Vu; Nguyen T.N.T.; Park, C.H.; Jung, C. H. Study of composition, heat treatment, and inorganic nanocrystal incorporation for hybrid-solar-cells performance. Journal of the Korean Physical Society, Vol. 67, No. 7, pp. 965-969, 2014.

Trần Ngọc Đảm. In-House Graduate Training Program - Training in Laboratory. Abstract Book of Vietnam Engineering Education Conference “Transformative Change: Educating the Engineers to Innovate the Future of Vietnam”, Date: March 25-26, 2014.

K.T. Hoang and S.H. Yang. Experimental Study and Process Optimization for Vibration-assisted Dry Micro-WEDM. Journal of Korean Society for Precision Engineering, Vol. 31, No. 3, pp. 215-222, 2014.

Võ Xuân Tiến. Enhancing Student Motivation in Foundry Technology using Active Learning and CDIO Practices. Abstract Book of Vietnam Engineering Education Conference “Transformative Change: Educating the Engineers to Innovate the Future of Vietnam”, Date: March 25-26, 2014.

Trương Minh Trí. HEEAP Training Under One Choice in the Inevitable Integration Period. Abstract Book of Vietnam Engineering Education Conference“Transformative Change: Educating the Engineers to Innovate the Future of Vietnam”, Date: March 25-26, 2014.

V. A. D. Cai and P. Bidaud. Self-adjusting isostatic exoskeleton for the elbow joint: Mechanical Design. Proceedings of Romansy 2014 XX CISM-IFToMM Symposium on Theory and Practice of Robots and Manipulators, At Moscow, Volume: 22.

Nguyễn Trường Thịnh. Adaptive Neuro-Fuzzy Control for Ionic Polymer Metal Composite Actuators. Advances in Intelligent Systems and Computing Volume 274, 2014, pp 939-947, Series ISSN: 2194-5357, A Book Series of  Springer Berlin Heidelberg Publisher.

Pham Huy Tuan, Nguyen Van Khien, Mai Van Trinh. Shape optimization and fabrication of a parametric curved-segment prosthetic foot for amputee. J. Science & Technology: Technical Universities, Vol. 102, pp. 89-95. , 2014.

Võ Xuân Tiến. PROJECT - BASED LEARNING - THE PROPER METHOD TO REALIZE CDIO – Experiences from teaching process the major "Metal technology" in University of technology and education HCMC. Conference of CDIO, 12/12/2014, National University HCMC.

Minh-Tai Le, Shyh-Chour Huang. Hexagonal Representative Volume Element for Modeling and Analysis of Mechanical Properties of Carbon Nanotube Reinforced Composites. Applied Mechanics and Materials, Vols. 496-500 (2014) pp 251-254 (EI).

Minh-Tai Le, Shyh-Chour Huang. Modeling and Estimating the Effective Elastic Properties of Carbon Nanotube Reinforced Composites by Finite Element Method. Journal of Engineering Technology and Education, Vol.11, No.2, pp.145-158, June, 2014.

Minh-Tai Le, Shyh-Chour Huang. Modeling and Analysis the Effect of Helical Carbon Nanotube Morphology on the Mechanical Properties of Nanocomposites Using Hexagonal Representative Volume Element. Applied Mechanics and Materials, Vol. 577 (2014) pp 3-6. (EI).

V. A. D. Cai, V. L. Nguyen and P. Bidaud. Instrumented and Active Exoskeletons for Human Anatomical Joints: Design Methodology and Applications. Proceedings of the 2014 IEEE International Conference on Robotics and Biomimetics, At Bali, Indonesia, pp. 974-979.

Lê Chí Cương. The Absorption factor in X-ray stress Analysis of Anisotropic material using the Iso-Inclination method. Proceeding of the 15th International Symposium on Eco-materials Processing and Design 2014, Hanoi 12-15 January 2014, ISBN 987-89-5708-236-2.

Le Chi Cuong, Phase Stress Determination and Simulation for Alumina-Zirconia Composite Having Stress Gradient in Orthopedic Applications, The 15^th International Symposium on Eco-materials Processing and Design, Jan 14-16^th, 2014

Phạm Huy Tuân. A tristable compliant micromechanism with two serially connected bistable mechanism. Mechanism and Machine Theory Vol 71 – January 2014, pp: 27-39, Public by Elservier, ISSN: 0094-114X.

Minh-Tai Le, Shyh-Chour Huang. Investigation of effective parameters on mechanical property in nanoindentation of polymer/carbon nanotubes nanocomposite using square representative volume element. Proceeding of the 2^nd International Conference on Innovation, Communication and Engineering  2014 (ICICE 2014).

Minh-Tai Le, Shyh-Chour Huang. Numerical Simulation of Nanoindentation of Single Wall Carbon Nanotube Reinforced Epoxy Composite. Proceeding of the 3^rd International Conference on Engineering and Technology Innovation 2014 (ICETI 2014).

Vu Quang Huy, Nguyen Viet Tuyen, Dang Thai Son, Tran Ngoc Doan. Linear Quadratic Regulator Versus Model Predictive Controller: A Comparision On An Electromagnetic Levitation System. Proceedings of the 2^nd International Conference on Green Technology and Sustainable Development 2014.

Vu Quang Huy, Nguyen Viet Tuyen, Dang Thai Son, Tran Ngoc Doan. An Approach To Optimize A Cooling System And Remain Working Condition For Data Center. Proceedings of the 2^nd International Conference on Green Technology and Sustainable Development 2014.

Vu Quang Huy, Nguyen Viet Tuyen, Dang Thai Son, Tran Ngoc Doan. Control A Simple Magnetic Levitation System Using LQR. Proceedings of the 2^nd International Conference on Green Technology and Sustainable Development 2014.

Tran Van Tron¹, Le Chi Cuong¹and Dang Thien Ngon¹, Analysing The Effect Of Cutting Parameters On Machining Complex Surface Using Skd11 Steel, The 3^rd International Conference on Green Technology and Sustainable Development, Oct. 28^th, 2014, pp.116-119.

Nguyen Van Dan, Nguyen Van Thuc, Luong Thi Quynh Anh. The effect of co-precipitation on nanocrystalline structure of ferrite Zn_0.64Ni_0.36Fe₂O₄.­ Journal of science and technology -ISSN 0866-708x, 2014.

Nguyen Van Dan, Nguyen Van Thuc, Luong Thi Quynh Anh. Effect of crystal size on magnetic properties of nano-ferrite Zn_0.64Ni_0.36Fe₂O₄.­ Science of technology and metals- ISSN 1859-4344, 2014.

Nguyễn Văn Dán, Dương Lê Hùng, Lương Thị Quỳnh Anh, Nguyễn Văn Thức, Phạm Hồng Thạch. Effect of C/Ag concentration in epoxy paint on RADAR absorbence and adhesive strength of absorbing material with steel. Science of technology and metals- ISSN 1859-4344

Dang Minh Phung, Pham Van Canh, Tran Van Tri. Research and development of semi-automatic pineapple peeling and coring machine. Journal of technical education scicence, No.30, 2014.

Fan Jie, Wu Tiecheng, Ye Yan, Bui Ha Duc, Li Xiaoping (2013), “A Magnetic FieldProjector for Deep Brain Modulation ”. IEEE Neural Engineering: 1214 – 1217.

Truong Nguyen Luan Vu, Moonyong Lee. An extended method of simplified decoupling for multivariable processes with multiple time delays. Journal of chemical engineering of Japan Vol. 46, No. 4, pp. 279-293, 2013.

Truong Nguyen Luan Vu, Moonyong Lee. Analytical design of fractional-order proportional-integral controllers for time-delay processes. ISA Transactions, Vol. 52,  No. 5, pp. 583-591, 2013.

Huy-Tuan Pham, Quoc-Cuong Tran, Dung-An Wang. Numerical Analysis of the Through-Width Vibration Rolling Process. International Journal of Advanced Transport Phenomena, Vol. 02, No. 01, pp. 21-24., 2013.

Hoai-Nhan Nguyen, Jian Zhou, Hee-Jun Kang, Young Shick Ro. Robot Geometric Parameter Identification with Extended Kalman Filtering Algorithm.  Communications in Computer and Information Science, Vol. 375, of the series, pp 165-170, 2013.

Truong-Thinh Nguyen, Young-Soo Yang, Jae-Woong Kim. An Artificial Neural Network System for Predicting the Deformation of Steel Plate in Triangle Induction Heating Process. International Journal of Precision Engineering and Manufacturing Vol. 14, No.4, Springer, 2013.

Truong Nguyen Luan Vu, Nguyen, T.N.T.,  Park, C.H.; Jung, C. H. Effect of anualling and semiconductor nanoparticle incoporation on the performance of hybrid bulk hetero-junction solar cells. Journal of the Korean Physical Society, Vol. 62, No. 5, pp. 729-738, 2013.

Phạm Ngọc Tuấn, Nguyễn Xuân Quang, Nguyễn Tính, La Thanh Hải. The online whiteness tester. Proceedings of the 3^rdNational Conference on Mechanical Science &Technology, HCMC November 6^th, 2013.

Truong Nguyen Luan Vu, Moonyong Lee. A unified approach to the design of advanced proportional-integral-derivative controllers for time-delay processes. Korean Journal of Chemical Engineering, Vol. 30, No. 3, pp. 546-558, 2013.

Truong Nguyen Luan Vu, Le Hieu Giang, Nguyen Truong Thinh, Dang Thien Ngon, Le Linh. Fractional-order PI controllers design based on IMC scheme for enhanced performance of dead-time processes. 13^th International Conference Control, Automation and Systems (ICCAS), Korea, 2013.

Van Hưu Thinh, Nguyen Thanh Thin. Design, Mannufacturing of a cassava  peeling machine. Vietnam Mechanical engineering journal, ISSN0866-7056, Vol 11/2013.

Đặng Trí Dũng, Nguyễn Trường Thịnh. Controlling of 5 DOF manipulator based on tele-operation. 8th International Conference on Computing and Convergence Technology ICCCT2013, Korea.

Nguyen Truong Thinh,  Tho Phuoc Tuong. Analysis of  Kinematics and Dynamics of 4-dof  Delta parallel robot. The 2nd International Conference on Robot Intelligence Technology and Applications 2013,  USA.

Nguyen Truong Thinh,  Dang Tri Dung. Adaptive Neuro-Fuzzy Controller of IPMC Actuators for Bio-memetics and Bio-medical devices. The 2nd International Conference on Robot Intelligence Technology and Applications 2013,  USA.

Nguyen Truong Thinh, Tuong Phuoc Tho, Trinh Duc Cuong. A Generalized Approach on Design and Control Methods Synthesis of Delta Robot. The 8th International Conference on Information Processing, Management and Intelligent Information Technology (ICIPT 2013), April 1-3, 2013, Seoul, Korea.

Phạm Thị Hồng Nga. Development of Multi Purpose Automated Weld Inspecting Equipment". Optics and Precision Engineering Vol 21,No.8,  8/2013 – China, ISSN: 1004-924X.

Phạm Thị Hồng Nga, Trần Thế San. Tổ chức tế vi và cơ tính của lớp composite TIC/CO trên bề mặt thép AISI H13 tráng phủ bằng phương pháp laser cladding. Tạp chí Cơ khí Việt Nam Số 9-2013, Trang 58-63, ISSN 0866-7056.

Le Chi Cuong, Dang Thien Ngon and To Thanh Tuan, Research on the Application of Phased Array Ultrasonic Technology to Detect Welding Defects in Butt Weld, Journal of Engineering Technology and Education, KUAS, Taiwan, Vol.9, No.5, ISSN 1813-3851, pp.449-454, 2013 (SCIE paper).

Đặng Thiện Ngôn, Lê Chí Cương. Numerical Analysis of the through-width vibration rolling process. International Conference on Aerospace, Mechanical, Automotive and Material Engineering 12-13, Sept 2013 Singapore.

Dang Thien Ngon, Le Chi Cuong and Phan Van Toan. Research And Proposal On Welding Technique For Generating Slag Inclusion Defect, Proceeding of The 3rd National Conference on Mechanical Science & Technology, ISBN 978-604-67-0061-6, No. 3, 639-645, Apr. 2013

Đặng Thiện Ngôn, Lê Chí Cương. Development of Multi Purpose Automated Weld Inspecting Equipment". International Conference on Aerospace, Mechanical, Automotive and Material Engineering 12-13, Sept 2013 Singapore.

Nguyễn Trường Thịnh, Tưởng Phước Thọ. A Generalized Approach on Design and Control Methods Synthesis of Delta Robot. Research Notes in Information Science (RNIS) Vol 13, pp 179-183, 31-05-2013, Publisher: AICIT – Korea.

Le Chi Cuong. X-Ray Stress Measurement Of Textured SUS316L Stainless Steel Used For Shrouds Of Nuclear Power Plants, Journal of Science and Technology, 92, 110-116, 2013.

Le Chi Cuong. Determination of Influence of Isotropy to Absorption Factor in X-Ray Stress Analysis Using Ψ-Type Goniometer, Journal of Engineering Technology and Education, KUAS, Taiwan, Vol.9, No.5, ISSN 1813-3851, pp.411-418, 2013 (SCIE journal).

K.T. Hoang and S.H. Yang. A study on the effect of different vibration-assisted methods in micro-WEDM. Journal of Materials Processing Technology, Vol. 20, No. 9, pp. 1616-1622, 2013.

K.T. Hoang and S.H. Yang. Experimental study of vibration assisted μ-WEDM in gas medium. The 5th   International Conference of Asian Society for Precision Engineering and Nanotechnology, 2013.

K.T. Hoang, S.K. Gopalan and S.H. Yang. Experimental study and modeling of fraction of energy transferred between electrodes in µ-EDM. The 5th International Conference on Manufacturing, Machine Design and Tribology, 2013.

Nguyễn Trường Thịnh. Control for Smart Transportation Vehicle Based on Dynamic Model. Advances in Intelligent Systems and Computing Volume 208, 2013, pp 993-1001, Series ISSN: 2194-5357.

Huy-Tuan Pham, Quoc-Cuong Tran, Dung-An Wang. Numerical Analysis of the Through-Width Vibration Rolling Process. The 3^rd International Conference on Sustainable Energy (3^rd ICSE), Oct 29-30, 2013, HCMC University of Technology, Vietnam, pp. 102-107.

Hai-Dang Nguyen, Huy-Tuan Pham, Dung-An Wang. A miniature pneumatic energy generator using Kármán vortex street. J. Wind Engineering & Industrial Aerodynamics, May 2013, v. 116, pp. 40-48. (SCI), 2013.

Pham Huy-Tuan, Nguyen Van-Khien. A Monolithic Flexural-Based Prosthetic Foot For Amputee. Journal of Engineering Technology and Education, National Kaohsiung University of Applied Sciences, Vol. 9, pp. 461-467, 2013.

Hoai-Nhan Nguyen, Jian Zhou and Hee-Jun Kang. A New Full Pose Measurement Method for Robot Calibration. Sensor, Vol. 13, pp. 9132 – 9147, 2013.

Dung-An Wang, Jyun-Hua Chen, and Huy-Tuan Pham. A Constant-Force Bistable Micromechanism. Sensors and Actuators A: Physical, Vol. 189, pp. 481-487, (SCI), 2013.

Nguyễn Trường Thịnh. A Method for Controlling Wheelchair Using Hand Gesture Recognition. Advances in Intelligent Systems and Computing Volume 208, 2013, pp 961-970, Series ISSN: 2194-5357.

Quach Van Thiem, Tran  Van Chu. Study on the effect on cycle time on the tensile strength and flexural strength of wood plastic composite. Journal of Technical Education Science, No 24-2013. “HCMUTE”

Quach Van Thiem, Tran  Van Chu. Study on the effect of Hopper’s temperature to die zone on the tensile strength and flexural strength of wood plastic composite. Forestry science and Technology Journal of Viet Nam Forestry University, No 3-2013.

Quach Van Thiem, Tran  Van Chu. Study on the effect of technological parameters of injection process on the tensile strength and flexural strength of wood plastic composite. Forestry science and Technology Journal of Viet Nam Forestry University, No 4-2013.

Trần Ngọc Đảm. Five Pilot Lessons for Preparing Students for Engineering Careers and as Researchers. Kỷ yếu Hội nghị Quốc tế IETEC'13, ĐHSPKT TPHCM ngày 3-6/11/2013.

Nguyễn Minh Khai, Hoàng An Quốc. Improved swiched boost inverter with reducing capacitor voltage stress. IEEE international symposium on industrial electronics, 2013.

Truong Nguyen Luan Vu; Cao, T. T. H. ; Lee, M. Industrial PI controller design of a Smith predictor for optimal servo control of a FOPDT process with output constraint. WASET 2012 International Conference, Japan.

Trần Ngọc Đảm, Toru Sasaki, Takashi Kikuchi, Nob.Harada. Environmental Annealing Thin Metallic Wire By Plasma In Atmospheric Pressure. Conference on Green Technology and Sustainable Development, University of Techniacl Education HCMC, 9/2012.

Le Chi Cuong, Simulation of Sin²ψ Diagram in Stress Determination of Textured Materials, Green Technology and Sustainable Development, ISBN 978-604-918-021-7, Vol.1, No.1, 201-204, 2012.

Le Chi Cuong and Le Hoang Anh, Analysis for Structure of Nano Ceria Using Fourier Analysis for X-Ray Diffraction Line, Green Technology and Sustainable Development, ISBN 978-604-918-021-7, Vol.1, No.1, 255-259, 2012.

Le Chi Cuong. A new method for phase quantitative determination for high strength doublex ferrite-austenite stainless steel using x-ray diffraction. The 2012 International Conference on Green Technology and Sustainable Development, University of Techniacl Education HCMC, 9/2012.

Le Chi Cuong and Phan Hoàng Mau, X-Ray Stress Analysis For Textured Materials Having Stress Gradient, Journal of Science and Technology, Journal of Science and Technology, No. 90, 119-124, 2012.

Le Chi Cuong. Determination of influence of isotropy to absorption factor in x-ray stress analysis. The 2012 International Conference on Green Technology and Sustainable Development, University of Technical Education HCMC, 9/2012.

Nguyễn Trường Thịnh, Nguyễn Ngọc Phương, Tưởng Phước Thọ. Ac impedance based state of charge dynamic modeling of a lifepo4 battery for hybrid electric vehicle applications. The 2012 International Conference on Green Technology and Sustainable Development, University of Technical Education HCMC, 9/2012.

Nguyễn Trường Thịnh, Nguyễn Ngọc Phương, Tưởng Phước Thọ. Automatic cleaning system for chemical tanks. The 2012 International Conference on Green Technology and Sustainable Development, University of Technical Education HCMC, 9/2012.

Đặng Thiện Ngôn, Vũ Văn Minh. Development of quantitative machine for coal using in the tuynel brick production line for coal using in the tuynel brick production line. The 2012 International Conference on Green Technology and Sustainable Development, University of Technical Education HCMC, 9/2012.

Đặng Thiện Ngôn, Thái Văn Giáp. Research and development of the technology, equipment for manufacturing rubber membrane diffuser. The 2012 International Conference on Green Technology and Sustainable Development, University of Technical Education HCMC, 9/2012.

Đặng Thiện Ngôn, Le Chi Cuong, Tô Thanh Tuấn. Research On The Application Of Phased Array Ultrasonic Technology To Detect Welding Defects In Butt Weld. The 2012 International Conference on Green Technology and Sustainable Development, University of Technical Education HCMC, 9/2012.

Nguyễn Trường Thịnh, Nguyễn Ngọc Phương, Tưởng Phước Thọ. Autonomous inspection with multi-link robotic fish. The 2012 International Conference on Green Technology and Sustainable Development, University of Technical Education HCMC, 9/2012.

Nguyễn Trường Thịnh, Nguyễn Ngọc Phương, Tưởng Phước Thọ. Development of the simultaneous mapping system for the robotic fish. The 2012 International Conference on Green Technology and Sustainable Development, University of Technical Education HCMC, 9/2012.

Lê Hiếu Giang, Huang Shyh-Chour. Effect of Moiture on Fracture Properties of Fiber-Reinforced Polyamide 66. Advance Science, Engineering and Medicine, American Scientific Publishers, Vol 4, pp 1-5, 2/2012, ISSN: 2164-6627 (print); EISSN: 2164-6635.

Đỗ Thành Trung. Design and manufacturing of the upper arm using polymer matrix composite. The 2012 International Conference on Green Technology and Sustainable Development, University of Technical Education HCMC, 9/2012.

Đỗ Thành Trung. The optimal design of composite leaf spring for light weight vehicle. The 2012 International Conference on Green Technology and Sustainable Development, University of Technical Education HCMC, 9/2012.

Truong Nguyen Luan Vu, Moonyong Lee. Enhanced Simplified Decoupling for multivariable processes with multiple time delays. The 31^st IASTED Asian Conference on Modelling, Identification, and Control, Thailand, 2012.

Bui Ha Duc and Li XiaoPing (2012). “Functional neuroimaging of circadian fatigue”. Int. J.Computer Applications in Technology 45(2):156-162

Dung-An Wang, Chun-Yuan Chiu, Huy-Tuan Pham. Electromagnetic Energy Harvesting from Vibrations Induced by Kármán Vortex Street. Mechatronics, Vol. 22, pp. 746-756 (SCI), 2012.

K.T. Hoang, T. Gurussamy, S.K. Gopalan and S.H. Yang. Study on machining characteristic of titanium alloy in micro-WEDM. Korean Society for Precision Engineering Spring Conference, 2012.

Huu-Tu Nguyen, Huy-Tuan Pham, and Dung-An Wang. A Switching Scheme for a Compliant Bistable Mechanism Using Harmonic Forcing. The 29^th Annual Meeting of Chinese Society of Mechanical Engineers (CSME), Dec 7-8, National Sun Yat-sen University, Kaoshiung, Taiwan, 2012.

Quach Van Thiem. Research on using sawdust, shaving for the production of wood plastic composite. International conference on green technology and sustainable development, Volume 1-2012.

V. A. D. Cai, P. Bidaud, V. Hayward and F. Gosselin. Kinematic Measurement of the Knee Joint using Self-Adjusting Isostatic Exoskeleton. Article in Journal of Biomechanics 45:S517, July 2012.

Pham Huy Tuan, Nguyen Van Khien. A Monolithic Flexural-Based Prosthetic Foot For Amputee. The 2012 International Conference on Green Technology and Sustainable Development (GTSD2012), HCM city University of Technical Education, Sept 29^th – 30^th, HCM city, Vietnam.

Truong Nguyen Luan Vu, Moonyong Lee. Design of fractional-order PI controller with smith predictor for processes with time delay. Korea Institute of Chemical Engineering, 2012.